Hard Money Loans for House Flipping: A Complete Guide

Investor Resources · Hard Money Loans

Cambridge Home Loan · Investor Lending Guide

A profitable flip is decided before you ever pick up a hammer: in the numbers, the budget, and the loan structure behind the deal. Here’s how hard money financing actually works for house flipping, and how to run the math so your numbers hold up from purchase to sale.

House flipping runs on two things working together at the same time: a property priced to leave room for profit, and financing fast enough to actually close on it before someone else does. Hard money loans exist because conventional mortgages cannot do the second part. A bank that takes six weeks to underwrite a loan is simply not useful for a distressed property that needs to close in ten days, or a renovation that needs funding released in stages as work is completed.

For full details on loan terms, leverage, and eligibility, visit our hard money loan program page. This guide focuses specifically on how the financing fits into the flipping process itself: the math that decides whether a deal works, how the rehab portion of the loan is actually paid out, how to manage your renovation against the loan’s clock, and how to protect your profit margin from the mistakes that quietly erode it.

Asset-basedfinancing built around the property
Drawsrehab funds released as work completes
6-18 Motypical flip loan terms

Why hard money and house flipping go together

Flipping is a short-term business. You buy a property, improve it, and sell it, usually within a matter of months. The financing behind that cycle needs to match its timeline, and that is exactly what a hard money loan is built to do. Unlike a conventional mortgage designed to be held for decades, a hard money loan is designed to be held for the length of a single project and then paid off when the property sells.

Because the loan is asset-based rather than income-based, approval depends far more on the deal itself, the purchase price, the rehab budget, and the projected resale value, than on your personal tax returns or employment history. That structure is what lets hard money lenders close quickly and release renovation funds in stages, rather than handing over the full amount at closing the way a conventional loan would for an owner-occupied purchase.

The core math every flip has to pass

Every successful flip starts with the same basic calculation, often called the 70% rule, which gives investors a quick way to sanity-check a deal before going further. It is a guideline, not an exact formula, but it is a useful first filter.

Maximum Offer = (After-Repair Value × 70%) − Rehab CostsA quick first filter for whether a deal is worth a closer look

The logic behind the 70% figure is that it builds in room for your financing costs, holding costs, selling costs, and profit, all in one conservative cushion. If the purchase price a seller wants is higher than what this formula allows, the deal likely does not leave enough margin to be worth pursuing, at least not at that price.

Three numbers feed this calculation, and getting any one of them wrong undermines the whole analysis.

  • After-repair value (ARV). What the property will realistically sell for once renovated, based on recent, truly comparable sales nearby, not aspirational pricing.
  • Rehab costs. A detailed, itemized renovation budget, not a rough guess, ideally reviewed by a contractor who has actually walked the property.
  • Purchase price. What you are actually paying to acquire the property, which the formula then checks against the other two numbers.

Lenders run a similar calculation when they underwrite your deal, which is one reason a conservative purchase price and a well-documented rehab budget make for a far smoother loan approval than an aggressive one built on optimistic assumptions.

A note on the 70% figure: It is a common starting guideline, not a universal rule. Experienced flippers sometimes work with a different percentage depending on the market, the property type, and their own cost structure, but the underlying logic, leaving a real margin between cost and value, always applies.

Building a rehab budget you can trust

An accurate rehab budget is arguably more important to a flip’s success than the purchase price itself, because it is the number most likely to be wrong, and the one most likely to erase your profit if it is.

Walk the property with a contractor before you finalize numbers

A rehab budget built from a quick visual walkthrough alone almost always misses something, often an expensive something: outdated electrical, plumbing issues hidden behind walls, or foundation concerns that only show up once work begins. A contractor’s eyes on the property before you submit your loan application catches far more than a buyer’s can alone.

Break the budget into real categories

A single lump-sum rehab number is much harder to manage, and much easier to underestimate, than a budget broken down by category: roof, systems (electrical, plumbing, HVAC), kitchen, bathrooms, flooring, paint, and exterior. Category-level detail also makes draw requests far easier to document.

Build in a contingency

Experienced flippers commonly add 10% to 15% on top of the base rehab estimate as a contingency reserve. Older properties, in particular, tend to reveal additional work once walls and floors are opened, and a contingency keeps a surprise from becoming a financing crisis.

Price labor and materials at current, local rates

Costs vary significantly by market and shift over time. A budget copied from a different market or an outdated price list is a budget that is already wrong before the first demolition day.

How draws work during your flip

Unlike a conventional loan that disburses the full amount at closing, a hard money flip loan typically releases the rehab portion of your financing in stages, called draws, as work is completed and verified.

  1. Initial funding at closing. The purchase portion of the loan funds at closing, along with any rehab funds tied to the first phase of work.
  2. Work is completed to a milestone. You or your contractor complete an agreed stage of the renovation, such as demolition, rough mechanicals, or drywall.
  3. You submit a draw request. This typically includes photos, invoices, or a contractor’s sign-off showing the completed work.
  4. The lender verifies the work. Many lenders use a third-party inspector to confirm the work matches the draw request before releasing funds.
  5. Funds are released. Once verified, the draw is released, usually within a few business days, and the cycle repeats for the next stage.

Because interest typically accrues only on funds that have actually been drawn, not the full rehab budget sitting undrawn, keeping your draw requests organized and submitted promptly both keeps your project moving and keeps your carrying costs as low as possible.

Keeping draws moving smoothly

  • Take dated, well-lit photos of completed work at every stage, before it gets covered up
  • Keep contractor invoices organized and matched to your budget categories
  • Schedule inspections as soon as a milestone is complete, rather than batching several together
  • Communicate with your lender before a scope change, not after the work is already done

Managing your timeline against the loan term

A hard money flip loan typically runs six to eighteen months, which sounds generous until a renovation runs long, a buyer’s financing falls through, or a listing sits longer than expected in a slower season. Building a timeline with real margin, rather than a best-case schedule, is one of the simplest ways to protect a flip’s profitability.

A useful way to think about your timeline is in three blocks: renovation, listing and marketing, and closing. Add a buffer to each block rather than only at the very end, since delays tend to show up throughout the process rather than all at once. If your loan term is approaching its end and the property is not yet sold, talk to your lender well before the maturity date, since most offer extension options that are far easier to arrange ahead of time than at the last minute.

A worked flip from purchase to sale

Seeing the full math in one place makes the moving pieces easier to evaluate together.

Example flip: purchase through sale

After-repair value (ARV)$320,000
70% of ARV$224,000
Rehab budget$45,000
Maximum offer (70% rule)$179,000
Actual purchase price$172,000
Loan amount (purchase + rehab)$195,000
Estimated holding & financing costs$14,000
Estimated selling costs$19,000
Total project cost$250,000
Sale price$318,000
Estimated profit~$68,000

This example stayed under the 70% rule’s maximum offer, kept the rehab budget close to its original estimate, and sold near the projected after-repair value. Each of those three things going according to plan is what produced the profit margin, and each is exactly where a flip can also go wrong.

Planning your exit: sell, rent, or refinance

Most flips are built around a straightforward sale, but it is worth knowing your options before you are forced to decide under pressure.

Sell at completion

The standard flip exit: list the renovated property, sell it, and use the proceeds to pay off the hard money loan and realize your profit.

Convert to a rental

If the sale market softens or the numbers work better as a long-term hold, refinancing into a DSCR or other long-term loan lets you keep the property as a rental instead of selling into a weak market.

Extend and relist

If the property hasn’t sold by the loan’s maturity date but is priced and marketed correctly, an extension can buy time without forcing a rushed price reduction.

Price reduction

Sometimes the right move is adjusting the price to match real market feedback, rather than holding out for an ARV estimate that the market is not supporting.

Deciding on a backup plan before you list, rather than after thirty days of silence, keeps a slow sale from becoming a financial emergency.

What flippers should know about profit and taxes

Flip profits are generally treated differently than long-term investment gains, and the distinction matters for how much of your profit you actually keep. Profits from flipping are typically taxed as ordinary business income rather than at long-term capital gains rates, since the property was held as inventory for resale rather than as a long-term investment.

This is a meaningful enough difference that it is worth planning for before your first flip closes, not after your tax return is due. A CPA familiar with real estate investors can help you understand your specific situation, including whether operating through a business entity makes sense for your volume of flips and your broader financial picture. This article is not tax advice, and a qualified tax professional should review your specific circumstances.

Choosing the right lender for your flip

Not every hard money lender operates the same way, and the differences show up most clearly once your project is underway, not at the term sheet stage.

  • Draw turnaround time. Ask how long draws typically take from request to funding, since a slow draw process can stall your crew and push your timeline.
  • Experience with your property type and market. A lender who already understands local values and rehab costs asks fewer clarifying questions and moves faster.
  • Extension policies. Know what happens, and what it costs, if your project runs past the original loan term before you need to find out under pressure.
  • Repeat-borrower terms. Many lenders improve pricing or leverage for investors who have successfully closed prior deals with them, which rewards building a long-term relationship with one lender.

Mistakes that quietly erode flip profits

Most unprofitable flips are not the result of one dramatic error. They are usually the accumulation of several smaller miscalculations, each one shaving a bit more off the margin that looked solid on paper at the start.

  • Overestimating the ARV. Using optimistic comps, or comps that aren’t truly similar in size, condition, or location, inflates the number everything else is measured against.
  • Underestimating the rehab budget. A thin budget without a contingency is one surprise away from running over, with no cushion left to absorb it.
  • Letting the timeline slip without adjusting the plan. Every extra month on a flip adds holding costs, interest, taxes, insurance, that compound against the profit margin.
  • Over-improving for the neighborhood. High-end finishes in a market that won’t support a high-end price add cost without adding proportional value.
  • Skipping the contingency reserve. Treating the rehab budget as exact, rather than an estimate, removes the cushion that protects the deal when something unexpected surfaces.

Have a flip you’re ready to fund?

Send us the property and your numbers, and a Cambridge Home Loan specialist will tell you exactly what you qualify for.

Start your application

Frequently asked questions

Is the 70% rule a strict requirement to get a loan?

No. It’s a common guideline investors use to quickly evaluate whether a deal has enough margin, and lenders look at similar logic during underwriting, but it isn’t a rigid cutoff. A strong deal with a slightly higher ratio can still qualify, while a deal with no real margin at all is a harder sell regardless of the exact percentage.

How is the rehab budget actually paid out?

Rehab funds are typically held back and released in draws as work is completed and verified, rather than disbursed all at once at closing. You submit a draw request at each milestone, and funds are released after the work is confirmed, usually within a few business days.

What happens if my rehab costs more than I budgeted?

If costs exceed your approved rehab budget, you’ll generally need to cover the overage yourself, which is why building a 10% to 15% contingency into your original budget is so important. Significant scope changes should be discussed with your lender as soon as they come up.

What if my flip doesn’t sell before the loan matures?

Most hard money lenders offer extension options, often for an additional fee, if a property needs more time to sell. Some investors also refinance into a long-term rental loan instead of selling, if that better fits the property and the market at the time.

Do I need prior flipping experience to get a hard money loan?

No. Many lenders, including Cambridge Home Loan, work with first-time flippers regularly. A well-documented deal with a realistic budget and adequate reserves can be approved without a prior flip on record.

Can I flip a property through an LLC?

Yes. Purchasing and flipping through an LLC is common practice among real estate investors, and most hard money lenders are set up to close loans directly in an entity’s name.

How quickly can a flip loan close?

Well-prepared deals commonly close within one to two weeks, which is often fast enough to compete with cash buyers on a distressed property. The exact timeline depends on how complete your documentation is and how quickly appraisal and title work can be completed.

Explore the full hard money loan program

See complete details on leverage, rates, and eligibility on our program page, or start your application today.

Leave a Reply